Networking

Networking support in Studs is provided by the Networkd daemon.

Basics

All methods operate on the Networkd singleton, accessed via cur. First step is start the daemon:

Networkd().start

To list the available interfaces, use list:

Networkd.cur.list => ["eth0":0]

To view status and statistics for a given interface, use status:

Networkd.cur.status("eth0") =>
  ["name":"eth0", "up":true, "broadcast", ...]

Static IP

To configure a static IP address for an interface, pass the configuration data to setup, using "mode":"static":

Networkd.cur.setup([
  "name":   "eth0",
  "mode":   "static",
  "ip":     "192.168.1.150",
  "mask":   "24",
  "router": "192.168.1.1,
  "dns":    "8.8.8.8 8.8.4.4"
])

DHCP

To configure an interface for automatic IP address assigment using DHCP, use setup with "mode":"dhcp":

Networkd.cur.setup(["name":"eth0", "mode":"dhcp"])